## How To Calculate Cubic Feet For Sand Box

The sand calculator offers 4 "Box" area fields and 2 "Circular" area fields for you to calculate multiple areas simultaneously (back yard, front yard, driveway, garden, etc.). Our Sand calculator @AtakTrucking will help you estimate how many Cubic Yards of Sand you need for your desired coverage area.

4. Enter the dimensions into the calculator for square or rectangular sand boxes. 5. Click the "Calculate" button. The calculated result is the your required sand in cubic feet, pounds and 25 pound boxes. Instructions for circular (round) sand boxes: 1. Measure the diameter (the largest length measurement from one side to the other) in feet. 2.

For example, if the sandbox has a radius of 4 feet, and you want the sand to be 1 foot deep, you will need a little more than 50 cubic feet of sand: 4 times 4 times 3.14 times 1 equals 50.24. This example would require just over 100 bags of sand since each bag fills up half a cubic foot.

To calculate the volume or capacity of an object or space in cubic feet, simply enter its width, length and height in either feet, inches, centimeters, meters or yards into the calculator below. If you need any help with calculating cubic feet manually, an explanation can be found at the bottom of this page.

## How can the answer be improved?

1. Measure length in feet. 2. Measure width in feet. 3. Determine desired depth of sand for your sand box in inches. Four inches is typically an adequate depth, more or less to preference. 4. Enter the dimensions into the calculator for square or rectangular sand boxes. 5. Click the "Calculate" button.

If you need to convert to cubic feet from inches: divide the final number (i.e. the total you get after multiplying the three dimensions together) by 1728. If you need to convert to cubic feet from metres : multiply your final number by 35.31.

(There must be at least 3 sides for volume but the number for any reasonable number of sides is acceptable.) Enter the length of a board; 48 is the default. Also enter the height each side is, 8 is the default. Press the Calculate button. Volume is in cubic inches, cubic feet and cubic yards.

If you need to convert to cubic feet from inches: divide the final number (i.e. the total you get after multiplying the three dimensions together) by 1728. If you need to convert to cubic feet from metres : multiply your final number by 35.31.